The band welding machine, designed for workshops that require the "butt welding" system, is capable of welding bandsaw widths ranging from 20 mm to 60 mm (0.79" to 2.36").

Key features include increased sensitivity in welding and annealing thin steel and carbon steel bandsaw blades without the need for additional flux, and the process takes only a few seconds. It comes equipped with electronic current control, electronic annealing current, and includes a cutting shear.

The ELITE SOLDAmaq 60 mini operates on a "Push and Go" concept: simply follow the provided welding parameters based on the saw's thickness and width, close the clamping jaws, and activate the welding button. This machine facilitates both welding and annealing of the bandsaw in one clamping cycle without additional materials or flux. The SOLDAmaq EC deburring machine is available for smoothing out the welding seam.

Technical specifications for the SOLDAmaq 60 mini include compatibility with steel bandsaw widths from 20 mm to 60 mm (0.79" to 2.36") and thicknesses ranging from 0.6 mm to 1.2 mm (0.023" to 0.047"). The maximum welding cross-section is 48 mm² and it operates with an installed power of 6.5 kW.

The machine's dimensions are 600 x 800 x 500 mm and it weighs 72 kg. Optional equipment is available to fully equip the workshop to meet all welding needs, including a cutting shear for cutting bandsaws at a 90º angle without burrs, various SOLDAmaq band saw welders (models 30/40/60) for steel bandsaws, and the SOLDAmaq EC deburring machine for removing weld seams without reheating.