Descripción

Electric stacker for 1500kg and height up to 5.6, with a platform it offers an efficient and safe solution for the handling of loads in warehouse environments where greater visibility and direct access to the load are required.
Safety and productivity
● Electric motor eliminates the need to replace the coal brushes
● Multifunction display with BDI and time counter.
● The side battery is easy to maintain.
● Shock absorber for silent operation.
● Timon equipped with emergency investment device to stay safe.
● The automatic deceleration function makes the operation safer.
● The built-in pressure relief valve protects the overload stacker, increases reliability.
● With brake in handle in vertical and horizontal position position, increasing the safety of the stacker.
● Emergency power disconnect switch.
● Low speed switch in the form of a turtle.
● Continuous speed control.

Optimal structural design
● Bajo Bareciate guarantees stable operation.
● The vertical drive wheel guarantees good maintenance and a small spinning radius.
● The powder-proof motor structure protects braking and motor by making them more durable and reliable
● The mast and frame are divisible and interchangeable.
● Fully free elevation, suitable for low ceiling houses. (The stacker with a height of 3m can enter through a 2m door)
UTILITY
● The low voltage protection adjustment prolongs the battery life time.
● Electronic components are concentrated, simplifying the circuit and facilitating assembling, debugging and maintaining.

1.2.Model
 
AE15.56 Platform

1.3. TYPE
 
Electricor

1.4.Operator
 
Uploaded

1.5.Load capacity
Q (KG)
1500

1.6.Distance from the center of charge
c (mm)
600

1 8. Load distance, center Delgee to the fork
x (mm)
697

1.9.Axles distance
and (mm)
1405

2.1.Service weight
kg
760/810/835/860

2.2.Load per shaft, loaded front / rear
kg
1280/1070

2.3.Load by shaft, front / rear without load
kg
650/200

3.1.Wheels
 
Polyurethane

3.2.Front tire size
 
Φ250x70

3.3.Tire size. rear
 
Φ80x70

3.4.Additional wheels (dimensions)
 
Φ150x60

3.5.Number of rear front wheels (x = drive wheels)
 
1x + 2/4

3.6.Tread, front
b10 (mm)
586

3.7.Tread, rear
b11 (mm)
410/525

4.2.Height. low mast
h1 (mm)
2050/2210/2410

4.3.Free elevation (option 2500- 3500 mm)
h2 (mm)
1570/1740/1940

4.4.Max. height elevation
h3 (mm)
4500/5000 /5600

4.5.Height, extended mast
h4 (mm)
5030/5510/6110

4.9.1maxima minimum rudder height in driving position
h14 (mm)
1150/1450

4.10. Height of the arms of the wheels
h8 (mm)
81

4.15. Height of the fork, down
h13 (mm)
90

4.19. Full length
l1 (mm)
1990 (2070)

4.20. Length Up to the face of the forks
l2 (mm)
920

4.21. Total width
b1 / B2 (mm)
850

4.22. Dimensions of the fork
s / E / L (mm)
60/170/1070 (1150)

4.25. Total width of the forks
b5 (mm)
570/695

4.32. Distance to the ground, center of the axles
m2 (mm)
26

4.34.1 Hall Width for Palets 100x1200
AST (mm)
2550

4.34.2 Hall width for pallets 800x1200
AST (mm)
2520

4.35. Spinning radius
WA (mm)
1655

5.1.Scroll speed. with 1Sin Load
km / pm
6.5 / 6.7

5.2.Lifting speed, loaded / downloaded
meters /'s
0.09 / 0.16

5.3.Descent speed. Charged / Downloaded
meters /'s
0.15 / 0.16

5.8.Max. Overlavable pending (loaded / downloaded)
%
6/15

5.10. Service brake
 
Electromagneticor

6.1.Drive motor
kw
1.2 (ac)

6.2.Lifting engine in S3
kw
22

6.4.Battery voltage, KS nominal capacity (Mastildulplex)
(V) / (ah) or kwh
24/200

6.5.Battery weight
kg
160

10.7 Sound pressure level in the driver's seat
dB (A)
70