Descripción

Electric stacker of 1500 Kg load for a height up to 3500 mm, equipped with lithium battery for greater efficiency and durability.
1. Standard rudder: The standard rudder provides the operator with a family and comfortable control over the equipment, which facilitates the operation and maneuverability of the stacker.
2. High horizontal tensile engine: This design places the traction motor at the top of the equipment, which facilitates the change of the drive wheel when necessary, reducing the downtime and simplifying maintenance.
3. Design of 4 points for improvement of stability: The 4-point design increases stability of the stacker, providing a solid base and reducing the risk of dumps during the operation.
4. Security system:
   - Emergency stop: allows you to quickly stop the equipment in case of emergency, improving the safety of the operator and the environment.
   - Key switch: Control the stack on and off, which helps prevent unauthorized use.
   - Hour counter: Registers the operating time of the equipment, which facilitates the monitoring of scheduled maintenance and service.
5. Fixed legs with adjustable hairpins: Fixed legs provide additional stability to the stacker, while adjustable forks allow adjusting the height to adapt to different types of loading and work requirements.
6. Big steering wheel: With a 150 mm x 65 mm steering wheel, the ergonomics and ease of handling of the stacker is improved, allowing precise and comfortable control even for long periods of operation.
7. Ability to cross rough floors: The design of the stacker makes it more resistant and capable of maneuvering on irregular or rough surfaces, which increases its versatility and usefulness in various work environments.
8. Convenience To adjust the height: The ability to easily adjust the height of the stacker allows to adapt to different load heights and work environments, improving the efficiency and comfort of the operator.

1.2.Model
 
AE15.35 Lithium

1.3. TYPE
 
Electric

1.4.Operator
 
On foot

1.5.Load capacity
Q (KG)
1500

1.6.Distance from the center of charge
c (mm)
600

1 8. Load distance, center Delgee to the fork
x (mm)
688

1.9.Axles distance
and (mm)
1180

2.1.Service weight
kg
550

2.2.Load per shaft, loaded front / rear
kg
555/1495

2.3.Load by shaft, front / rear without load
kg
405/145

3.1.Wheels
 
PU

3.2.Front tire size
 
Φ195x70

3.3.Tire size. rear
 
Φ80x93

3.4.Additional wheels (dimensions)
 
Φ150x47

3.5.Number of rear front wheels (x = drive wheels)
 
1x + 1/2

3.6.Tread, front
b10 (mm)
523

3.7.Tread, rear
b11 (mm)
410/525

4.2.Height. low mast
h1 (mm)
2090/1840/2090/2200/2340

4.3.Free elevation (option 2500- 3500 mm)
h2 (mm)
No / a

4.4.Max. height elevation
h3 (mm)
1600/2500/3000/3300 /3500

4.5.Height, extended mast
h4 (mm)
2090/3060/3560/3860/4060

4.9.1maxima minimum rudder height in driving position
h14 (mm)
670/1300

4.15. Height of the fork, down
h13 (mm)
90

4.19. Full length
l1 (mm)
1800/1720

4.20. Length Up to the face of the forks
l2 (mm)
598

4.21. Total width
b1 / B2 (mm)
800

4.22. Dimensions of the fork
s / E / L (mm)
60x142x1150 (1070)

4.25. Total width of the forks
b5 (mm)
300--570 (695)

4.32. Distance to the ground, center of the axles
m2 (mm)
26

4.34.1 Hall Width for Palets 100x1200
AST (mm)
2245

4.34.2 Hall width for pallets 800x1200
AST (mm)
2220

4.35. Spinning radius
WA (mm)
1365

5.1.Scroll speed. with 1Sin Load
km / pm
4.5 / 5

5.2.Lifting speed, loaded / downloaded
meters /'s
0.09 / 0.16

5.3.Descent speed. Charged / Downloaded
meters /'s
0.19 / 0.11

5.8.Max. Overlavable pending (loaded / downloaded)
%
6/15

5.10. Service brake
 
Electromagnetic

6.1.Drive motor
kw
65

6.2.Lifting engine in S3
kw
22

6.4.Battery voltage, KS nominal capacity (Mastildulplex)
(V) / (ah) or kwh
24/60

6.5.Battery weight
kg
52

10.7 Sound pressure level in the driver's seat
dB (A)
70