Descripción

Tymbia by CHL presents the NEW SERIE K2C: Forklift diesel/ LPG 2000 to 3500 kg
New appearance with industrial design concept.
Security and reliability with a people-oriented concept.
Comfortable man-machine interaction
Control design that emphasizes efficiency at work.
 
Technical specifications:

Load capacity: 2000-3500Kg
Standard lift height: 3000 mm
Engines:  Kubota V2403-CR-TE5B / Kubota WG2503
Energy: Diesel/LPG
Maximum speed: 18-19 km/h

 
Other characteristics:

More environmentally friendly and energy saving with less oil consumption.
Small turning radius
Reduced hydraulic oil temperature
Reduced engine coolant temperature
Total temperature of reduced transmission
Decrease in the pressure of the pipe system
Exit and enlarged income
Enhanced side view

 
The entire machine adopts an engine that complies with the EU StageV standard and the US environmental protection standard.

The diesel engine adopts the high-pressure electronic common rall engine KUBOTA V2403/XINCHAI3E22YG51 EU Stagev and DOC + DPF high-gas treatment technology.
Simple/double fuel used by the high-pressure electronic common rall engine KUBOTA WG2503, which uses three catalytic high-gas treatment technologies.

 
Improved operation comfort

The steering wheel diameter is reduced to reduce arm fatigue.
The space for the pedal is extended.
Ergonomic design seat.
Meter retrolighting design is easy to read and the engine failure code is displayed in the meter.
The horizontal view of the mast has been improved.
The buffering reduction is configured.
The space for the head is extended

 
Reliability has greatly improved

Cast address.
Increased resistance and stiffness of the mast.
Reduced front fly Improves truck stability.
Improves the sealing performance of the motor axis.
Improved tire design.
The strength and stiffness of the protective tejadillo is improved.
The level of protection of the electrical system is improved and the electrical parts adopt a modular design.
The 24" conical sealing is adopted in hydraulic pipes and is easy to assemble and dismantle.
Improves the cooling performance of the truck.
The load capacity of the mast and frame is improved and security performance is improved.

Driver Retention Warning System
The vehicle is equipped with a driver's seat belt fastening warning system, making the driving safer.
 
Improved operator presence system with comprehensive security update

Induction security system for walking in the work: When the machine is in operation, the operator will suddenly leave the correct operating position without dropping the pedal of the accelerator and the energy will be cut to protect the safety of the operation.
LHS (Load Handling System) site induction security system and reboot control system: When the operator leaves or returns to the correct operating position without loosening the LHS control device, the operation caused by the LHS operation will be suspended and will not occur automatically, to protect the security of the LHS operation.
LHS Static Control System (Load Handling System): When the LHS control device is triggered and the engine is removed, the operation caused by the LHS control will not occur automatically after starting the engine. Only when the LHS control device is restarted and then operated, the operation can continue. Prepared for the future and prepared for Stage V.
Security alarm system without parking: When the wheelbarrow is not off and the driver is not using the hand brake, an audible warning is used to alert the driver.

 
The performance of easy maintenance is further improved.

The motor shaft has been improved to reduce maintenance frequency.
The fault code is displayed on the meter to improve the truck maintenance efficiency.
The large opening angle of the engine hood facilitates maintenance.
The contact space between the engine and the transmission box is extended and facilitates the maintenance of the engine filter.
The integrated electric box is easy to maintain.
The 24" conical sealing is adopted in hydraulic pipes and is easy to assemble and dismantle.

Automatic DPF Regeneration (Diesel Particle Filters)

The Euro 5 diesel engine model is equipped with automatic DPF regeneration function; when the automatic regeneration program is run, the engine provides 100% power. The DPF regeneration program can be interrupted at any time.

 
The efficiency of the operation is improved.

Increased speed has improved considerablyo# of the camio3.5 t.
The address radio is small.
The light switch is integrated into the steering knob and is suitable for operation.

Diesel products with high capacity batteries.

Models with di motorit issel Stage V use baterandace of great capacity, the start of the vehandass and electricity are mtosure.

Improved performance in energy savings and consumption reduction.

Oil consumption is reduced.
Pressure loss is reduced.
LED lights are standard.