Implement Ventosa 400kg forks forklift

This new Suction Cup for Forks forklift, easily connects to a forklift and can be used inside and outside the enclosure of a building to allow safe and efficient glazing of glass and windows that weigh up to 400kg of uprising. It can also handle; pcomposite aneles, steel, granite marble, plastic, wooden doors. As for the level of power and battery charge, the indicator ignition is located on the ON/OFF switch. Batters must be charged at least once a month to prolong their useful life.Batteries can be loaded by connecting a single-phase power supply to the 110-220V charger, located on the side of the control box. TECHNICAL CHARACTERISTICS AND FUNTIONS Charge capacity: 400kg Remote control for inclination up to 90 degrees. Wireless remote control for dual pump vacuum system. 360-degree manual rotation. Pivote lateral – 90° left + right (within the specifications of the forklift) It is easily secured to the wheelbarrow. Double vacuum system. Security Chain. Charger: 110-220V PROCESS OF CONTROL INALÁMBRICO REMOT 1. The implement must be safely connected to the forklift.2. Turn on the power switch in the control box.3. Drop the emergency stop in the remote control.4. Press the start button on the remote control.5. A green state light will appear (if the red state light remains, the remote control has not been matched). USE RECOMMENDATIONS VIDRIO GIRATORIO To rotate the glass, it is recommended to use two people. Make sure the implement is connected to the glass center. Make sure the area is free of pedestrians and obstacles. Lift the glass enough to allow the glass to turn without the lower edge hitting the ground. Operators DEBEN stop behind the glass by rotating the glass and NEVER in the same plane or in front of the glass (if the suction cups are released, the glass will fall). BASCULAR VIDRY To tilt the glass, it is recommended to use an observer to tilt the glass. Make sure the implement is connected to the glass center. Make sure the area is free of pedestrians and obstacles. Lift the glass enough to allow the glass to incline without the lower edge hitting the floor or the forklift. The DEBEN operators stop in a safe place by tilting the glass and be careful not to stand anywhere where the glass can cause injuries if it falls or is released from the suction cups. CRISTAL PIVOTE LATERAL To laterally pivot the glass, it is recommended to use an observer to help rotate the glass. Make sure the implement is connected to the glass center. Make sure the area is free of pedestrians and obstacles. Lift the glass enough to allow the glass to turn without the edges hitting the floor or the forklift. The DEBEN operators stop in a safe place when they turn the glass laterally and be careful not to stop anywhere where the glass can cause injuries if it falls or gets loose from the suction cups. IMPORTANTE: Para ROTACIÓN, INCLINACIÓN Y PIVOTE LATERAL, si el implemento no está unido al centro del vaso, luego coloque el vaso de forma segura y vuelva a colocar las tazas en el medio del vaso o use un extra operadores para ayudar con la rotación. ADDITIONAL OPTIONS: Vacuum cups for curved glass. Vacuum cups for stone.